Prepping A YETI Roughneck (formerly ICEY-TEK) for Maximum Performance:
- The YETI Roughneck (formerly Icey-Tek) line of coolers is the most insulated coolers on the market today.
- Due to the amount of insulation used in this product, it will retain heat as well as cold.
- If you have stored your cooler in direct sunlight and in temperatures above 72˚F (22˚C) your cooler will have the same heat retaining characteristics as a preheated oven. If you load the cooler with ice in this respect, you will not realize the cooler’s full potential in ice retention.
- Firstly, we recommend the use of larger-sized cubed ice or block ice. Small-sized cubed ice and crushed ice have a larger surface area on which heat can adversely affect it.
- If your cooler has had, the opportunity to build up heat you must place a small sacrificial amount of ice
(10 LB or 5 kg) inside the cooler (Cooler Size Pending) three (3) hours before loading it with the intended contents. This reduces the heat within the walls and the lid of the cooler allowing it to retain ice in the manner to which it was designed. Since initially cooling the cooler will cause the ice will melt, you will need to empty the water to allow room for more ice. The longer the cooling down period, the lower the temperature will be before use and the better ice retention will result.
- In addition, you should load the cooler with as much ice as possible. Air spaces in the voids where ice was been placed will also increase the loss of ice due to cooling of the air within that void. Pre-cooling the intended contents drinks, food, etc. will also help in maximizing ice retention.
- Once the cooler is in use, we recommend that you do NOT empty the cold water. More energy is required to cool air than to maintain the cold water.
- If using your cooler to store or transport cold food, for food safety reasons please ensure that the temperature remains below 40˚F or 4˚C. The danger zone for heated food is between 40˚F or (4˚C) and 140˚F or (60˚C).
- If prepped properly your cooler will have 5% of ice remaining after nine days in temperatures of 90˚F (32˚C). Some people have reported that their coolers have maintained ice in excess of 15 days. We are confident you will be completely satisfied in the cooler’s ability to maintain ice if the pre-cooling steps are followed.
- We are also confident that you will find the YETI Roughneck (formerly Icey-Tek) cooler to be one of the most rugged and durable coolers on the market.
YETI Roughneck (formerly Icey-Tek) Cleaning and Maintenance:
- Before using your YETI Roughneck (formerly Icey-Tek) cooler, clean the interior with any standard dish washing detergent and rinse thoroughly.
- Remove tough odors by washing with a 1-part bleach to 50 parts water mixture. Give special attention to the lid restraining line, although also made with a material that will not absorb stains or odors, the texture of the line will allow small particles to adhere, and should be removed in the event of lingering odors.
- The exterior has a smooth finish to allow ease of cleaning, and in most cases, simply rinsing and wiping down with a non-abrasive type cloth will perform this task. Cleaning using a mild dish detergent is advisable.
- Remove films left from diesel by using a lanolin-based hand cleaner or baby oil and non-abrasive type cloth do not use an alcohol based cleaner as it will dry before removing the stain.
YETI Roughneck (formerly Icey-Tek) Warranty:
- Thank you for your purchase of a YETI Roughneck (formerly Icey-Tek) cooler! We believe you will enjoy many years of use with your new cooler. All products, especially those manufactured by hand like ours will occasionally have a manufacturing defect. In the event that you have purchased a defective cooler, be assured that YETI Roughneck (formerly Icey-Tek) will follow through in our commitment to satisfy all claims involving defective merchandise.
- Please read this warranty carefully as it is a “LIMITED WARRANTY” as defined under Federal Law. This warranty gives you specific legal rights; you may also have other rights that vary from state to state throughout the U.S.A.
- What Your Warranty Covers:
- Any defect in materials or workmanship.
- For how long after your purchase? YETI Roughneck (formerly Icey-Tek) Personal Use warranty limited to 3 Years. YETI Roughneck (formerly Icey-Tek) Commercial Use warranty limited to 1 Year.
- What we will do? Make a refund for the original purchase price including return shipping cost or provide you with a new cooler and cost involved with returning the defective item.*
How to Make a Warranty Claim:
- Return the item via FED-EX or UPS in its original packaging or equivalent and a copy of the original bill of sale.
DO NOT SEND YOUR COPY. Also, print your name and address and a description of the defect.
- Ship To: Waterloo Distributing, c/o Roy Seider, 15901 FM 150 WEST, Driftwood TX, 78619
- Insure your shipment in case of loss or damage in shipment. Waterloo Distributing accepts no liability in case of damage or loss. Pending review, a new cooler will ship, along with a reimbursement for your cost to ship the original cooler to us.
What Your Warranty Does NOT Cover:
- Normal wear such as scratches, dings, scuff marks, fading of color.
- Damage from misuse or use not intended for this product.
- Acts of God, Sabotage or War are not covered.
- "False Claims" Items found not to be defective due to manufacturing, will not be returned to claimant, unless claimant arranges to have the item returned at their expense. Waterloo Distributing will notify the claimant as to the decision regarding the viability of the claim. Claimant will have 14 days to arrange for the return of the item or if Waterloo Distributing can repair the item then it will upon approval from the claimant with cost for such repair paid by claimant. Any actions taken by Waterloo Distributing after the 14 day period in regards to the item being destroyed or other will be carried out in the best interest of Waterloo Distributing and Waterloo Distributing will be held harmless for its necessity in doing so.
- “Damages by others”: No claims will be honored involving damages incurred by the use of shipping companies other than those used by Waterloo Distributing in making direct deliveries to the end consumer or those made direct to our customers where the shipment was noted as being received damaged upon delivery.
- If you purchased your product outside of the continental, USA this warranty does not apply.
Waterloo Distributing
C/O Roy Seider
15901 FM 150 WEST
Driftwood TX, 78619
Phone #: 512-394-9384
Fax #: 512-857-9387
Specifications:
- This Product has been made from premium components & materials to create the ultimate in a commercial quality icebox for your enjoyment.
- Components consist of a 100% A grade polyethylene external skin with a non staining, non odor absorbing, impact resistant food grade internal liner which all attributes to the boxes extended durability.
- Superior ice retention obtained by utilizing premium polyurethane insulation injected under pressure within wall cavities and lids.
- Ultra heavy duty self stopping lid hinges.
- Easy Grip integrated molded grab rails for ease of carrying.
- Innovative commercial grade skin protecting skids on bottom of all coolers.
- Recessed Anchoring Device for securing boxes in tie down situations.
- Lid Latches made from flexible, black thermoplastic elastomer material are enhanced with a variety of additional features and options to provide smooth trouble-free performance under real-world conditions.
